Adjust Headlamp - Victory V92TC Owner's Manual

Adjust Headlamp

The headlamp should shine straight ahead of
the motorcycle. The top of the headlamp High
beam should be just below the center of the
lamp at a distance of 25 feet (7.62 m).
1. Check and adjust the tire pressure and
rear shock absorber.
2. Straddle the motorcycle in an upright
position and sit in the operator's seat.
3. Set the ignition switch to the On
position and set the headlamp to High
beam. Check the headlamp for correct
aim.
4. To adjust the headlamp, remove the headlamp bezel to
expose the adjusting screws. Turn the desired adjusting
screw clockwise one revolution, and turn the screw
directly across the headlamp counterclockwise one
revolution. Repeat if necessary, one revolution at a
time.
5. Reinstall the headlamp bezel.
25 feet (7.62 m)
Center of Headlamp
1
1. Headlamp Adjusting Screws
Maintenance
1
109