Use And Care Of Filter - Brita OPFF-100 User Manual

STEP 4: Insert filter cartridge
into filter cup.
Support the bottom of the filter system
with one hand. Align the insert groove
on the lower part of the cartridge
with the filter replacement indicator
at the front of the filter cup. Insert
the filter cartridge into the filter cup.
Lightly pull the filter back out, making
sure it is engaged. Do not force the
filter cartridge into the system base.
Inserting the new filter cartridge
automatically resets and activates the
filter replacement indicator.
STEP 5: Flush the new filter cartridge with water.
Move the filter handle toward you to the filtered Brita

USE AND CARE OF FILTER

Your Brita Faucet Filtration System is ready to use!
®
By adjusting the filter handle to the following positions, you can select between filtered
and unfiltered water.
FILTERED WATER
Move filter handle to upper position:
Filtered water can only be drawn from
this filter port. All other water is unfiltered.
Front View
Filter Cartridge
Insert Groove
Turn on the faucet to flush the new filter for five minutes to
remove any carbon dust and activate the filter. It is normal for
carbon dust to appear. The 94-gallon/355-liter filter life begins
after the five-minute conditioning period.
NOTE:
Use with cold water only. Do not run hot water (above 100°F/38°C)
through the filter, as it may damage the filter.
4
Filter Cup
® water setting:
UNFILTERED WATER
Move filter handle to lower position:
Draw water from unfiltered water outlet.
Filter
Replacement
Indicator