Blanco BOSE610PX Instruction Manual page 17

appear in light and defrost position).
Turn the Temp & Time selector and set the desired oven temperature. The control offers a
PRESET temperature per every cooking mode or a full range between MIN and MAX to be adjusted
by hand. Check the value on the display after having selected the temperature.
The temperature appears on the clock display for about 5 seconds when the Time & Temp
selector is pushed or when a new function has just been selected.
As soon as the oven starts, the preheat LED (indicated by the bars) on the right side of the clock
display starts flashing and becomes steadily on when the preheat ends.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will show
OFF for a few
seconds.
Setting an automatic
function
After having selected a function as described before, the control can be programmed in order to set
timed cooking activities. The time program remains active even if the function is changed (exception:
pyrolyse). The following possibilities are available:
1 Timed cooking setting the cooking time (duration).
2 Timed cooking setting the end of cooking time (stop time).
3 Delayed cooking setting duration and stop time.
Push the knob in order to toggle between cooking duration (cook time) and end of cooking time (stop
time): the words "dur" or "End" are displayed respectively.
Turn the knob left/right to edit the duration or the stop time when the proper word is displayed:
1. When the word ' dur' is displayed, the control shows 30' as the standard cooking duration.
Turn the knob left/right in order to set the actually desired cooking time in a range between 0
and 240 minutes. The display will flash ' dur' and its value alternatively for a few seconds then it
will show the time of day, the pot symbol and the
active. The end of cooking time is updated automatically.
2. When the word End is displayed, the control shows the current time as the initial stop time. In order
to set the actually desired end of cooking time in a 24 hours range:
- Turn the knob left/right, the hours flash.
- Modify the flashing hours value turning the knob left/right.
- Push the knob to switch back and forth between hours and minutes or wait a few seconds
until the minute's flash.
- Modify the flashing minutes value the knob left/right.
- Wait until the new End of Cooking time value stops flashing.
The display will flash End and its value alternatively for a few seconds then it will show the
time of day, the
cooking duration is updated automatically.
3. Repeat the same operations of point 1 then push the knob until End appears. the control
shows the "current time + cooking time" as the initial stop time. It's not possible to lower the end of
17
oven
symbol and the letter to indicate that a timed cooking is active. The
letter to indicate that a timed cooking is