Electronic Control - Blanco BOSE610PX Instruction Manual

Electronic control

Control panel description
The oven control panel is made with one display and two knobs. Please note that the below panel
drawings are not the final panel these are simply an indication of how the panel works.
- Time & Temperature display
- Time & Temperature knob
- Mode (oven functions) knob
TEMP & TIME MODE
Fig. 8
The time and temperature knob is mainly for clock or temperature setting and automatic time
functions programming. Select the desired item by moving the knob.
Power up
At every power-up, in pyrolytic ovens, the latch mechanism runs an automatic self-test: the oven
door locks and unlocks. This operation takes about half a minute. The lock led turns on and while
the action is in progress, it remains steadily displayed when the door is fully locked; it's off when the
door has been unlocked.
Do not try to open the door until the lock led disappears.
Programming time
functions
At every power-up, the control shows the time of day blinking set at 12:00 as the initial
value. The time increases every minute. The only possible action is the "Clock Regulation", all other
oven operations are inhibited.
In general, turn the Temp/Time selector left or right in order to edit the values and modify
them by steps; hold the knob on the left or right to fasten the decrease/increase operations.
Setting the time of
day
The time of day is always displayed in the 24 hours format. Hours and minutes are set separately. In
order to set the time of day, mode selector must be in ZERO position, the -/+ knob acts on the time
of day by default.
15