Memory Card Drive Confirmation; First Dot Position Adjustment - Epson Stylus Photo895 Service Manual

EPSON Stylus PHOTO 895/785EPX/915/825

5.3.7 Memory card drive confirmation

It is possible to check whether the memory card drive is normal when the Main board
is replaced.
Figure 5-15. Memory card drive confirmation
Click on the [OK] button to display the current condition of memory card drive. If an
error message is displayed on screen, replace the Main board.
Adjustment

5.3.8 First Dot Position Adjustment

With this function, you can adjust the first dot position. This adjustment is not
necessary for repair, as a rule. However, make this adjustment on user's request.
Click on the [Print] after setting A4 paper, first dot position is printed.
In adjustment, specify "+" to shift the first dot position to the left or "-" to shift it to the
right.
Adjustments with the service program
Figure 5-16. First dot position adjustment
Revision B
126