Epson Stylus Photo895 Service Manual page 101

EPSON Stylus PHOTO 895/785EPX/915/825
5. Rotate the bushing on the shaft of paper eject roller toward the top and release it.
Paper Eject Roller Bush
Figure 4-48. Paper eject roller bush
Disassembly and Assembly
6. Move the paper eject roller to the left side, then take the paper eject roller out from
the bushing on the right side and remove the paper eject roller from the left side
bushing.
Figure 4-49. Removal of Paper Eject Roller
When you replace the Frame front, make sure to lubricate the
A D J U S T M E N T
R E Q U I R E D specific amount of G26 to the Frame front. Refer to the Chapter
6 Refer to Figure 6-5. "Lubrication point 5".
When you replace the Paper eject roller with new one, make sure
to lubricate the specific amount of G26 to the Spur gear 25.6.
Refer to the Chapter 6 Refer to Figure 6-7. "Lubrication point
7".
Disassembly
Revision B
101