Inserting Three R6 (Size Aa) Batteries Into The Remote - Sony DHC-FLX7D Operating Instructions Manual

To prevent the speakers from
falling
When you place the speakers on top of the sub
woofer and the main unit, do the following.
1
Place the speaker support on the sub woofer
and the main unit. Tighten one of the screws
(1) lightly to temporarily fix the speaker
support, tighten the other screw to fix (2),
then tighten the first screw (1) firmly.
Speaker support
Screw (1)*
Screw (2)*
* Main unit: Screw
Sub woofer: Screw
2
Insert the speaker support in the slot of the
front speakers. Tighten two screws while
threading the rear boards of the front
speakers.
Screw*
* 3 3.5 × 14
Note
When carrying the system, do not lift the front speakers
only.
12 GB
3
3 × 10
3
3.5 × 20
Slot
Inserting three R6 (size AA)
batteries into the remote
e
E
e
Operating a Sony TV
You can use the following buttons on the remote
to operate a Sony TV.
To
Turn the TV on or off
Switch the TV's video input
Change the TV channels
Adjusts the volume of the TV
speaker(s)
Tip
When the remote no longer operates the system,
replace all the batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove all the batteries to avoid possible damage from
battery leakage.
Notice for carrying this system
Do the following to protect the DVD
mechanism. Use buttons on the unit.
1
Turn on the system, then press DVD.
Make sure that all discs are removed
from the unit.
2 Hold down DVD, then press ?/1 until
"LOCK" appears.
3 Release ?/1 first, then release DVD.
4
Unplug the AC power cord.
E e E
Press
TV ?/1.
TV/VIDEO.
TV CH +/–.
TV VOL +/–.