Other Features; To Adjust The Brightness Of The Display; To Listen To Multi Channel Sound - Sony DHC-FLX7D Operating Instructions Manual

Other Features

To adjust the brightness of
the display
Use the remote for the operation.
1
Press AMP MENU.
2
Press ENTER.
3
Press V or v repeatedly to select
"DIMMER".
4
Press B or b repeatedly to select the
setting you want.
DIMMER 1 y DIMMER 2 y
DIMMER 3
5
Press ENTER.
To listen to multi channel
sound
On the remote, press 2.1CH/MULTI
repeatedly while pressing SHIFT.
Each time you press the button, the display
changes as follows:
2.1CH t MULTI t AUTO
2.1CH: The sound is output in 2-channel stereo
and the sub woofer.
MULTI: The sound is output in multi channel.
AUTO: Automatically switches between 2.1CH
and MULTI according to the type of disc being
played.
2.1CH: for CD, dts-CD, Super Audio CD, MP3
MULTI: for DVD, VCD
Notes
• When using headphones, this setting is fixed to
"2.1CH".
• When you select "AUTO" in DIGITAL function, the
sound is output in 2.1 channel.
To adjust the decoding format
mode
This operation lets you specify the decode type
for the signal input to the digital audio jacks and
DVD function.
Use the remote for the operation.
1
Press AMP MENU.
2 Press V or v repeatedly to select "DECODE
FORMAT".
3
Press ENTER.
4 Press B or b repeatedly to select the decode
format mode.
5
Press ENTER.
• "AUTO MODE" switches between DTS, Dolby
Digital, or PCM decoding automatically.
• "PCM MODE" decodes all the input signals as
PCM signals. If Dolby Digital or DTS (etc.)
signals are input, no sound will be heard. Set to
"PCM MODE" if, when set to "AUTO MODE",
sound from the digital audio jacks (for CD etc.) is
interrupted when playback starts.
GB
53