Connect The Speakers - Sony DHC-FLX7D Operating Instructions Manual

1 Connect the speakers.

Connecting speaker cords
Main unit
Speaker
Black (#)
Note
Be sure to match the speaker cord to the appropriate
terminal on the components: 3 to 3, and # to #. If
the cords are reversed, the sound will be distorted and
will lack bass.
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead antenna horizontally.
10 GB
Red (3)
Color tube
AM loop antenna
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cable.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
Tips
• For even higher quality video images;
– Use an optional component video cable to connect
the COMPONENT VIDEO input jacks on your
TV to the COMPONENT VIDEO OUT jacks of
this system. If your TV is compatible with
progressive format file signals, use this connection
and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP"
(page 27).
– Use an optional S-video cable to connect the S
VIDEO input jack on your TV to the S VIDEO
OUT jack of this system.
• If you connect a video deck between this unit and the
TV, you may experience video leakage when
watching the video signal from this unit. Do not
connect a video deck between this unit and the TV.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the position
of your local power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
VOLTAGE
SELECTOR
120V* 220V 230-
* Saudi Arabian Model 120 – 127 V
240V