Sony DHC-FLX7D Operating Instructions Manual page 63

Picture
Playback starts automatically.
• The DVD features an auto playback function.
Refer to the operating instructions supplied with
the disc.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the playback stops at
the auto pause signal. Refer to the operating
instructions supplied with the disc.
The system turned off during DVD playback.
• If approximately one hour passes with DVD
playback paused or with the DVD top menu or a
DVD menu displayed during DVD playback, the
system automatically turns off.
You cannot perform some functions such as
Stop, Scan, Slow-motion Play, Repeat Play,
Shuffle Play, or Program Play.
• Depending on the disc, you may not be able to do
some of the operations described above. Refer to
the operating instructions supplied with the disc.
Messages do not appear on the screen in the
language you want.
• Select the language you want for the on-screen
display in "OSD" under "LANGUAGE SETUP"
in the Setup Display (page 26).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track. Refer to the operating instructions
supplied with the disc.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles. Refer
to the operating instructions supplied with the
disc.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles. Refer to
the operating instructions supplied with the disc.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played. The angle can be changed only when the
"ANGLE" indicator lights up on the front panel
display (page 35).
• The DVD prohibits changing the angles. Refer to
the operating instructions supplied with the disc.
There is no picture.
• Press DVD (or FUNCTION on the remote
repeatedly until "DVD" appears).
• Check that the system is connected securely.
• The video cable is damaged. Replace it with a new
one.
• Make sure you connect the system to the video
input jack of your TV (page 10).
• Make sure you turn on the TV.
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• When you play a VIDEO CD, make sure you set
the color system correctly, according to your TV
(color) system (except for Latin American
model).
• To force the system to switch to interlace when
PROGRESSIVE is selected, make sure the
function is set to DVD, then hold down DVD and
press DISPLAY.
The picture noise appears.
• Clean the disc.
• If video from this system has to go through your
VCR to get to your TV, the copy-protection
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking your connections, please try
connecting this system directly to your TV's
S video-input, if your TV is equipped with this
input (page 58).
• When you play a VIDEO CD, the color system is
different. Set the color system to match your TV
(page 28) (except for Latin American model).
The aspect ratio of the screen cannot be
changed even though you set "TV TYPE" in
"SCREEN SETUP" in the Setup Display when
you play a wide picture.
• The aspect ratio is fixed on your DVD.
• If you connect the system with the S-video cable,
connect directly to the TV. Otherwise, you may
not change the aspect ratio.
• Depending on the TV, you may not change the
aspect ratio.
continued
GB
63