Table of Contents
Advertisement
5.5
5.6
6/1553-DBC 444 01 Uen A1 2010-06-10
To restart the phone, do the following.
1.
Press and hold
2.
Select Restart the Phone, and press Select.
The message "Restart the phone?" is displayed.
3.
Press Yes to confirm and restart the phone. This may take a few
minutes.
4.
Enter the user id in the field Log on with and select Log on.
Updating the Phone Software
When new software is available, the message "A new version of the tele-
phone software is available. Update recommended." appears in the
phone display.
You then have 60 seconds to decide if you want to update the software
to the latest version.
•
Select No to skip the update and keep the current software version.
•
Select Yes to start downloading the software update from the soft-
ware server. The update process takes approximately 60 seconds
to complete, and the progress is displayed on screen.
–
When the update is successful, the phone reboots, and it is
then ready to use, or ready for logon, see 5.1 Starting and
Logging On on page 32.
–
If the update fails, the phone will use the old software version,
and you can start using, or log on when you press OK.
•
If no key is pressed within 60 second, Yes is selected automati-
cally, and the update will be installed.
Note: It is important that you do not disconnect the phone power supply
while the new software is being downloaded and saved. If a
power failure occurs, the software must be downloaded again.
Software Version
To view which software version is installed currently, do the following:
1.
Press
.
2.
Select Help and press Select.
3.
Select About Aastra 7444ip and press Select.
S
TARTING
.
, L
O
O
OGGING
N AND
FF
36
Hide quick links:
Advertisement
Table of Contents
