Display; Sequence; Zoom - EverFocus ELR-4 Instruction Manual

4.9 DISPLAY

1. Press Display button
2. Press once to show camera information. Please see the following table for status representation.
Recording
Alarm
3. Press again to show status information. Please see the following table for status representation.
Alarm
Motion
4. Press again to show both status information and camera information.
5. Press again to hide all information.

4.10 SEQUENCE

1. By mouse: Click Sequence button
2. By front panel: Click Sequence button on front panel to enter the auto sequential switching mode.

4.11 ZOOM

1. Make sure no camera is in playback mode
2. Select one camera
3. Right-click to bring up the menu bar and click
on menu by using mouse or press "Display" button on the front panel.
Playback Fast forward
Motion Video loss
Audio 1 Event
New firmware No network
to enter the auto sequential switching mode.
Fast backward
Express copy
Fan failure
Seq.
button, or press "Zoom" key on front panel.
31
Back pause
Audio out
HD temp. too high
HDD failure
Video loss