Table of Contents
Advertisement
Storage :
The lawn trimmer must not be stored over
35 °C or under direct exposure to sunlight.
3. Assembly
Fitting / Removing the
Telescopic Swivel Handle :
1
2
4. Initial Operation
Charging the Accu :
12
The telescopic swivel handle can be fitted as you wish in 45°
steps.
Fitting the Telescopic Swivel Handle :
v Guide the swivel handle
holder of the cordless lawn trimmer until the lock engages.
Removing the Telescopic Swivel Handle :
v Press the release button
The starting lockout and the ON button on the cordless lawn
trimmer no longer work when the swivel handle is being fitted.
For assembly of blades see 8. Troubleshooting "Replacing
the Cutting Blades" .
The battery should be fully charged before using for the first time.
Charging time (with flat battery)approx. 10 hrs.
The lithium-ion battery can be re-charged in any state of charge,
and the charging process can be interrupted at any time without
damaging the battery (no memory effect).
When the battery is fully charged the charger switches off auto-
matically. The battery may therefore be permanently connected
to the charger for charging.
WARNING !
A
Incorrect mains voltage damages batteries and the
battery charger.
V Ensure the correct mains voltage.
1. Insert charging cable
lawn trimmer.
4
2. Plug battery charger into a mains socket.
During charging socket
The battery is being charged.
When the charging socket
is fully charged.
3
3. First remove the charging cable
and then unplug the battery charger from the mains socket.
Do not store the cordless lawn trimmer in
places with static electricity.
1
at the desired angle into the handle
2
and pull out the swivel handle.
3
into charging socket
4
lights up red.
4
no longer lights up red, the battery
3
from the charging socket
4
of cordless
4
Advertisement
Table of Contents
