Product Dimensions - GE ZKD910 Installation Instructions Manual

PRODUCT DIMENSIONS AND CLEARANCES
ADVANCE PLANNING
• The drawer may be installed below a countertop,
a cooktop, a single or double oven and side by side
using 2 drawers.
• The warming drawer can be installed below approved
cooktops. Allow 2" min. clearance from bottom of cooktop
burner box to top of warming drawer cutout. See page 8.
• The warming drawer can be installed below approved
ovens. Allow a 2" min. clearance between cutouts.
Additional clearances may be required. See page 7.
Design Information
"
23-1/4
A
Drawer
Open
1"
B
Including
Handle
Dimensions
A
ZTD910 22"
ZTD910 w/ZXD30P 23-1/4" 27-1/2"
ZKD910 22"
4
10-1/2"
9"
C
B C
26" 30"
30"
26" 26-3/4"
• Electrical power cord is located on the right side
of the warming oven. Locate the outlet within reach
of the 56" long power cord in an adjacent cabinet,
within 42" of the right side or 16" from the left side
of the cutout. A recessed receptacle can be installed
on the right side of the cutout, 7" max. from the rear
of cabinet.