Models Available; Product Dimensions; Accessories; Tools And Materials Required - GE ZKD910 Installation Instructions Manual

ZTD910
Models
30" Wide model
Available
ZKD910
27" Wide model
Product
Dimensions
Dimension A
ZTD910
ZKD910
ZXD27B, ZXD30B – This kit provides for the

Accessories

installation of a custom front panel on 27"
and 30" wide models.
Note:
discarded when this kit is used. A custom handle (not supplied)
must be installed to complete the installation.
Tools and
• Wood screws and adhesive or other hardware for installing
Materials
runners or shelf to support warmer drawer.
• 2 x 4 or 2 x 2 lumber for runners
Required
• 2 x 4 or 2 x 2 wood block for anti-tip security
• Saw
• Level
• Drill and 1/16" bit
• Phillips screwdriver
Runners must be level, rigidly mounted and capable of supporting
150 pounds.
The warming drawers may be installed
directly into a wall or wall oven cabinetry,
or below a countertop.
27"
23-1/4"
Drawer
Open
1" 26"
Including
Handle
30"
26-3/4"
The original drawer front and handle will be removed and
Design Information
10-1/2"
9"
A
JXPN1 – Warming drawer pan kit. This kit
includes supports and a set of 5 pans which fit
into 27" and 30" models.
Warming Drawer
3