Design Information; Models Available; Product Dimensions; Accessories - GE ZKD910 Installation Instructions Manual

ZTD910
Models
30" Wide model
Available
ZKD910
27" Wide model
Product
Dimensions
Dimension A
ZTD910
ZKD910
ZXD27B, ZXD30B – This kit provides for the

Accessories

installation of a custom front panel on 27"
and 30" black and white wide models.
NOTE: The original drawer front will be removed and discarded
when this kit is used. The tubular handle can be reinstalled onto
the custom panel with longer screws (not provided). Or, the
original handle can be replaced with a custom handle of your
choice. (Handle is not supplied.) Choose a custom handle to match
or complement cabinetry hardware.
• Wood screws and adhesive or other hardware for installing
Tools and
runners or shelf to support warmer drawer.
Materials
• 2 x 4 or 2 x 2 lumber for runners
• 2 x 4 or 2 x 2 wood block for anti-tip security
Required
• Saw
• Level
• Drill and 1/16" bit
• Phillips screwdriver
Runners must be level, rigidly mounted and capable of supporting
150 pounds.
The warming drawers may be installed
directly into a wall or wall oven cabinetry,
or below a countertop.
27"
23-1/4"
Drawer
Open
1" 26"
Including
Handle
30"
26-3/4"

Design Information

10-1/2"
9"
A
JXPN2 – Warming drawer pan kit. This kit
includes supports and one full size and one
half size pan with lids. The pans fit 27" and
30" wide models.
Warming Drawer
3