Table of Contents
Advertisement
appliance should be marked on the outlet (13A).
• Assembly and electrical connection should be carried out by
specialised personnel.
• When installing this product we recommend you seek the help of
another individual.
• Protection against live parts must be ensured after installation.
• Connection data is printed on labels on the hob casing close to the
connection box.
• As the appliance is not fitted with an accessible plug, a means of
disconnection from the power supply must be must be included in
the fixed insatllation, in accordance with the installation regulations.
• The inlet cable must be positioned so that it does not touch any of
the hot parts of the hob or oven.
Caution
• This appliance must only be connected to a 230V ~ 50Hz network.
• Observe the connection diagram.
• The connection box is located underneath at the back of the hob
casing. To open the cover use a medium screwdriver. Insert it in the
slits to open the cover.
Mains electrical voltage:
Total rated electrical consumption: 2.8 kW
Any service call arising from incorrect installation may result in a
charge.
CDA and its representatives cannot be held responsible for any
matters resulting from incorrect connection, or related to either
24
230Vac, 50 Hz
Advertisement
Table of Contents
