Waeco Coolair CA850S Operating Manual page 15

BA_CA850S_SP950.book Seite 33 Mittwoch, 2. Mai 2012 5:05 17
I
Note
You can only use the remote control to switch the stationary air
conditioner in and out of standby mode.
SP950
® Switching to standby mode:
With the unit switched on, briefly press the ON/OFF (fig. 2 1, page 3)
button or the
"
 The digital display goes out, only the green power LED lights up.
 The compressor and the fan switch off.
® Switching the unit off completely:
With the unit switched on, press the ON/OFF (fig. 2 1, page 3) button for
3 seconds.
 The LEDs and digital display go out.
 The fan and the compressor switch off.
CA850S
® Switching to standby mode:
With the unit switched on, press the
remote control.
 The digital display goes out, only the green power LED lights up.
 The compressor and the fan switch off.
® Switching the unit off completely:
With the unit switched on, press the ON/OFF (fig. 2 1, page 3) button.
 The LEDs and digital display go out.
 The fan and the compressor switch off.
EN
" (fig. 3 1, page 4) button on the remote control.
"
Using the stationary air conditioner
" (fig. 3 1, page 4) button on the
33