Serial Ata Connector (Sata1, Sata2) - Avalue Technology EMX-A55E User Manual

2.4.17

Serial ATA Connector (SATA1, SATA2)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect the
right-angle side of SATA cable to
the onboard SATA port to avoid
mechanical conflict with huge
graphics cards.

Install the Windows® 2000 Service Pack 4 or the Windows® XP
Service Pack1 before using Serial ATA.

When using the connectors in Standard IDE mode, connect the
primary (boot) hard disk drive to the SATA1 connector.
User's Manual
SATA1
SATA2
EMX-A55E User‟s Manual 39