Rear Panel - Alinco DR-635T Instruction Manual

Part Names and Functions
• Functions that can be activated while pressing the FUNC Key
No. Key
1
5
8
9
10 MHZ/SHIFT
11 TSDCS/LOCK
12 HL/PACKET Sets the channel name function.
13 SQL/D
• Functions that require continuous pressing to be activated.
No. Key
13 SQL/DIGITAL When pressed for 1 second, the monitor function is on.
14 FUNC/SET

Rear Panel

No. Key
1
2
3
4
5
12
Function
PWR Reset to factory default settings.
V/M/MW
Erase the memory.
BAND/VVUU Switches to the single band mode.
CALL/RXBAND Accesses the clone function mode.
Switches to wide/narrow mode reception.
Switches to the AM reception mode.
Accesses the power supply voltage indication mode.
Function
(When the shift is set, the reverse function is on.)
When pressed for 2 seconds, accesses the set mode.
4
External Speaker Terminal
Power cable
Air-cooling fan
Antenna Connector
D-SUB Connector (Optional)
3 5 2
1
Function
Terminal for optional external speaker.
(Also used for the clone function.)
Connects to the 13.8VDC power supply.
Turn on while PTT is being pressed or when
the unit is hot.
Connect an antenna with 50 ohm impedance.
(PL-259 or compatible)
Connects to a personal computer for packet use.