Rear Panel - Alinco DR-620T Instruction Manual

Part Names and Functions

Rear Panel

12
• Functions that can be activated while pressing the FUNC Key
No. Key Function
1 PWR Reset to factory default settings.
5 V/M/MW
Erase the memory.
8 BAND/VVUU Switches to the single band mode.
9 CALL/RXBAND Accesses the clone function mode.
10 MHZ/SHIFT Switches to wide/narrow mode reception.
11 TSDCS/LOCK Switches to the AM reception mode.
12 HL/PACKET Sets the channel name function.
13 SQL/D Accesses the power supply voltage indication mode.
• Functions that require continuous pressing to be activated.
No. Key Function
13 SQL/DIGITAL When pressed for 1 second, the monitor function is on.
(When the shift is set, the reverse function is on.)
14 FUNC/SET
When pressed for 2 seconds, accesses the set mode.
4
No. Key
1 External Speaker Terminal
2 Power cable
3 Air-cooling fan
4 Antenna Connector
5 D-SUB Connector (Optional)
3 5
Function
Terminal for optional external speaker.
(Also used for the clone function.)
Connects to the 13.8VDC power supply.
Cools the unit during transmission. (PTT activation)
Connect an antenna with 50 ohm impedance.
(PL-259 or compatible)
Connects to a personal computer for packet use.
2
1