Rear Panel - Alinco DX-SR8 Instruction Manual

Rear Panel

(7)
No. Key
(1) ANTENNA connector
(2) RELAY (external relay)
jack
(3) External ALC input jack For connecting the phono-plug from the amplifi er ALC circuit
(4) CW-KEY jack
(5) ACC (accessory)
connector
(6) Power connector
(7) GND (ground) terminal For connecting a ground cable.
(6)
Function
For connecting an HF band antenna. Takes a 50 ohm impedance
coaxial cable with PL-259 connector.
For connecting external equipment such as a linear amplifi er for
switching between reception and transmission. Takes a phono-
plug.
when a linear amplifi er is used. The ALC input voltage must be
from 0 to -3 V DC.
For connecting a telegraph key or manipular paddle for internal
electronic-keyer
For connecting optional EDX - 2 antenna tuner.
[Pin configuration]
TUNE1 TUNE2 13.8VDC (1A)
TKEY GND
For connecting the supplied DC power cable.
Chapter 1 Getting Started
(1)
(5) (4) (3) (2)
21