Rear Panel; Display - Alinco DR-638H Instruction Manual

4
Getting Acquainted
Functions which can be activated while
Key
1 MW FUNC+V/M
2 DEL FUNC+CALL
3 SHIFT FUNC+MHZ
4 LOCK FUNC+TS/DCS
5 PRI FUNC+H/L
6 SKIP FUNC+SCAN
7 FUNC+MONI

Rear panel

4
1 2
9
NO. KEY FUNCTION
To Connect optional cable for ignition key On/
1
Ext. Power Jack
Off function.
2 To conect external stereo speaker.
Ext. Dual Speakers
Antenna
3 Connect a 50Ω antenna.
Connector
4 To conect external mono speaker.
Ext. Single Speaker
Automatically turns on at 45℃, and turns off
5 Fan
when it cools down.
appears, after pressing the
Programs the data into the memory.
Delete settings.
Changes shift directions.
Blocks the keys and dial operation
Enters to the Priority monitor.
Sets scan skip channels
Setting memory banks.
5
3

DISPLAY

1 2 3 4 5 6
19
20
21
25 22 23 24
NO. KEY Å FUNCTION
1 Appears when press FUNC key.
2 Appears while in AM mode.
3 Appears while using Middle output power.
4 Appears while using low output power.
5 Appears while channel setting in narrow band.
6 Appears while channel setting in offset direction.
Appears while channel setting in CTCSS encoding and
7
decoding
Appears while channel setting in DCS encoding and
8
DCS
decoding.
9 Appears while channels setting in voice companding.
COMP
10 Appears while open key lock function.
11 REP Not in use.
12
Not in use.
13 Appears while SUB band in Main side.
SUB
14 Not in use.
7 8 13 9 14 10 15 11 1712
26 25
27
18
16