Installation And Connection - Kleenmaid KED600 Instructions For Use Manual

Installation and connection

Removing wrapping
Selecting the
appropriate location of
the appliance
Installation
8
•
Packaging materials are environmentally friendly:
they can either be recycled, safely disposed of or
destroyed without any threat to the environment.
•
To be able to do this effectively all materials are
marked accordingly.
Be careful not to damage cabinet of
the appliance with a sharp object when
removing the packaging.
Ventilation slots and openings on the appliance
front and rear wall should not be obstructed.
•
Do not place the appliance in a room where there
is danger of freezing.
•
Location should be adequately ventilated. Room
temperature should always be between 0°C and
25°C as frozen water in the condensation water
receptacle or in the pump may damage the dryer.
•
Appliance can either stand on its own or can be
placed on top of a washing machine of the same
dimensions - minimum width 517 mm, depth
476 mm. The surface for placing the dryer must
be clean and flat. Use supplied vacuum feet to
prevent sliding of the appliance. Washing machine
hardtop must be wooden or metallic. To conceal
the opening between the two appliances, a
decorative trim (DECPL) is available. To order call
your nearest Kleenmaid Store on 13 13 08.
Do not place the appliance behind lockable
door, sliding door, and door with hinges on
the opposite side of the appliance.
Place the appliance in the room in such
a way to ensure free opening of the dryer
door.