Channel Sort; Channel Edit; Analogue Channel Fine Tune; Automatic Power Down - Toshiba 22SL700A Owner's Manual

Channel Sort

Change the order of the programme list.
1. Select Channels from the SETUP menu.
2. Highlight Channel Sort and press ► or
3. Pressing to check two channels to swap the
positions.
Channel Sort
1 Digital TEN HD 123456789 abcdefgh...
2 Digital ABC HDTV
3 Digital TEN Digital 123456789 abc...
4 Digital TEN HD 123456789 abcdefgh...
5 Digital ABC1
6 Digital ABC1
7 Digital ABC2
8 Digital ABC3
9 Digital ABC DiG Radio
10 Digital ABC DiG Jazz
Set Select
OK

Channel Edit

Edit the channel number and channel name.
1. Select Channels from the SETUP menu.
2. Highlight Channel Edit and press ► or
3. Press ▲ or ▼ to highlight the channel and press
to select.
4. Change the Channel Number by using the number
buttons 0~9. Change the Channel Name by using
the number buttons 0~9 to enter numbers and
letters.
Note: The Colour System/Sound System can be
changed only in Analogue TV.
Channel Edit
Network Name:
Channel Number:
Channel Name:
Frequency
Colour system
Sound system
Set Select
OK

Analogue Channel Fine Tune

When the reception is poor, you can use this function to
do the fine tuning.
1. In the SETUP menu, press ▲ or ▼ to highlight
Channels and press ► or
2. Press ▲ or ▼ to highlight Analogue Channel Fine
Tune and press to select.
3. Highlight and press
18
Getting started
to select.
Back Exit
RETURN EXIT
to select.
ABC Sydney
2
ABC HDTV
191.5
Auto
B/G
Back Exit
RETURN EXIT
to select.
to select the channel.
4. Press ◄ or ► to adjust the frequency. Press ◄ to
decrease and ► to increase the frequency.
Analogue Channel Fine Tune
1 BBC 1
2 RTP1
3 -----
4 -----
5 -----
6 -----
7 -----
8 -----
9 -----
10 -----
Adjust Select
OK

Automatic Power Down

The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not touch the control
buttons on the remote control or on the TV control panel.
1. In the SETUP menu, press ▲ or ▼ to highlight
Automatic Power Down.
SETUP
OSD Language
Channels
Automatic Power Down
Location
System Information
Parental

Reset TV

Select
2. Press ◄ or ► to select On or Off.
Reset TV
Selecting Reset TV will reset all TV settings to their
original factory default settings, excludes OSD Language
and Channels.
1. In the SETUP menu, press ▲ or ▼ to highlight
Reset TV and press ► or
SETUP
OSD Language
Channels
Automatic Power Down
Location
System Information
Parental
Reset TV
Select
2. Select OK to confirm, or select Cancel to exit.
Previous settings will be lost! Press
Cancel for no change. Press OK to
continue.
OK
175.25 MHz
687.25 MHz
55.85 MHz
209.25 MHz
223.2 MHz
572.3 MHz
590.25 MHz
623.25 MHz
759.2 MHz
772.2 MHz
Back Exit
RETURN EXIT
English
On
Home
Back Exit
RETURN EXIT
to select.
English
On
Home
Back Exit
RETURN EXIT
Cancel