Basic Operations; Turning The Tv On; Displaying The Home Screen; Watching The Tv - Toshiba 32L5400 Series Owner's Manual

You can enjoy visual or audio content, applications,
and TV broadcasts (or external input) by starting TV
Application.
Home screen
• The actual screen may diff er in appearance.

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
Using the TV remote control
1
Press 1 on the TV remote control, the ! power
indicator lights in green.
The TV Application starts up, and the TV
broadcast (or external input) appears.
NOTE:
If you watch black and white programmes when the
Colour System mode is set to "A" (Automatic), colour
noise may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to pages 13, 59).
Using the Easy remote control
1
Press 1 on the Easy remote control, and the !
power indicator lights up in green.
The TOSHIBA logo is displayed, and then the
home screen appears.
Using the TV itself
1
Press ! on the TV left side panel, and the !
power indicator lights up in green.
The previously displayed screen appears.
32404755L5400Series_En.indd 15 32404755L5400Series_En.indd 15

Basic Operations

Unknown
Switching off the TV
1
Press 1 on the remote control or ! on the TV
left side panel to switch to the standby mode.
NOTE:
• When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
• The TV will automatically turn off in 15 minutes
based on No Signal Power Down settings (-
page 26) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.

Displaying the home screen

If you press on the Easy remote control while
viewing the TV broadcast (or external input), the
home screen appears.
• For operations on the home screen, refer to page
36.

Watching the TV

To start the TV Application and switch to the TV
broadcast (or external input) while on the home
screen, perform either of the following:
• Select the and confi rm.
Unknown
• The actual screen may diff er in appearance.
NOTE
If BACK on the TV remote control is pressed twice, the
TV Application closes.
15
2014/07/24 17:06:24 2014/07/24 17:06:24