Enquiry - Siemens OpenStage 30T User Manual

Standard features

Enquiry

While you are on a call, you can call another phone (internal or external)
to make an enquiry/consultation request.
During a call
Press OK or press Enquiry (R)
Make the enquiry/consultation call.
When it is answered, the display
shows:
If the enquiry call is not answered
• Press ▲ or ▼ until the display
shows:
• Press OK to return to the
original call
If the enquiry call is busy
• Press ▲ or ▼ until the display
shows:
• Press OK to return to the
original call
Options available to you during an enquiry call:
• Return to the original call,
press OK
To switch between both calls,
press OK again
• Transfer the call, see page 21
• Connect the calls into a
conference, see page 22
20
<number>

Enquiry?

Connect held call?
The call is put on hold
<enquiry number>
Connect held call?
Your enquiry call cannot be
heard by the held party
<enquiry number>
Connect held call?
NUMBER BUSY
Connect held call?
<number>
Connect held call?