Installation And Test - Kenmore 796.488x2800 Service Manual

4. INSTALLATION
Before servicing, ask the customer what the trouble is.
1
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
2
Check with the troubleshooting guide.
3
Plan your service method by referring to the disassembly instructions.
4
Service the unit.
5
After servicing, operate the appliance to see whether it functions correctly.
6
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT
6
BOLTS
• Remove the transit bolts
(4 EA: ) with the supplied wrench.
1
• Keep the transit bolts and
spanner for future use.
• Insert the 4 caps
(provided) into the hole.
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
7
ADJUST THE
LEVELING
Turn the leveling feet to adjust
•
the appliance horizontally.
The appliance goes up by
•
rotating the feet clockwise.
The appliance come down by
•
rotating the feet counterclockwise.