Disassembly Instructions - Kenmore 796.488x2800 Service Manual

10. DISASSEMBLY INSTRUCTIONS

Disassemble and repair the pulling out power plug from the outlet.
CONTROL PANEL ASSEMBLY
TOP PLATE
1.
Remove 7 screws on the Rear Frame.
2.
Disassemble the Rear Frame.
3.
Pull the Control panel forward.
4.
Disconnect connectors.
5.
Remove 5 screws.
6.
Disassemble the controller assembly.
1.
Open the Lid.
2.
Remove 4 screws.
3.
Disassemble the Lid Assembly.
4.
Pull down the Dispenser by pushing hooks.
5.
Put a hand into the dispenser hole
and hold the top plate.
6.
Push backward using an opener
and lift the top plate.
¡ Do first left side (¥L).
40