How To Connect The Inlet Hose; Connect The Drain Hose; Connect Power Plug - Kenmore 796.488x2800 Service Manual

HOW TO CONNECT THE INLET HOSE

Verify that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leaks.

CONNECT THE DRAIN HOSE

· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
The end of the drain hose should be placed less than 96"from the floor.

CONNECT POWER PLUG

· Avoid connecting several electric devices, as
· Connect the power plug to the wall outlet.
doing so may cause a fire.
8