Test Operation - Kenmore 796.488x2800 Service Manual

7

TEST OPERATION

1
Preparation for
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
Check the water heating
6
function.
•
Press the WASH / RINSE button
and the present temperature will
be displayed.
7 Check the drain and spin
functions.
•
Press the POWER button twice
to restart.
•
Press the SPIN SPEED button.
•
Press the START / PAUSE
button.
•
Check the drain and spin
functions.
2
Press the POWER button.
Check the automatic
5
reversing rotation of the
drum.
•
Make sure that the drum rotates
clockwise and counterclockwise.
Press the
8
START / PAUSE button.
•
Listen for clicking sounds to
determine if the door is
unlocking.
9
3
Press the Start/Pause
button.
•
Listen for clicking sounds to
determine if the door has
locked.
Check the water supply.
4
•
Verify that if water is supplied
through the detergent dispenser.
9
Water removal.
•
If SVC is required, remove the
remaining water in the tub, by
pulling out the drain plug.