Installation And Test - Kenmore 796.4219#90# Service Manual

4. INSTALLATION & TEST
1
Before servicing, ask the customer what the trouble is.
2
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
3
Check with the troubleshooting guide.
4
Plan your service method by referring to the disassembly instructions.
5
Service the unit.
6
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
6
BOLTS
• Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove easily.
• Keep the shipping bolts and
spanner for future use.
• Insert the 4 caps (provided)
into the hole.
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
8
ADJUST THE
LEVELING
Turn the leveling feet to adjust
•
the appliance.
Turn clockwise to raise;
•
counterclockwise to lower.