Factory Preset Condition; Auto Store - Lynx C DA 5005 Reference Manual

Factory Preset Condition

The C DA 5005 is delivered preset for the following
mode of operation:
• Local control ENABLED
• Channel Status Mode
• Test Signal Color Bars
• Test Signal OFF – Normal operation for all
channels
• All channels "Alarm Enabled"
If this is the mode of operation required, then no
adjustments are necessary.

Auto Store

If no parameters are changed for 10 seconds then
the current settings will be written into flash memory
automatically, this can be seen by the alarm LED
flashing yellow four times.
Reference Manual C DA 5005 Version1.0
Page 17