9.2.2
Adjusting the width of the armrests
WARNING! Serious injury hazard if one of the armrests falls out of its bracket because
they have been adjusted to a width which exceeds the permissible value!
• The armrest width adjustment for the firm seat unit is limited on both sides by a spring-loaded
pin. This limiting pin may only pressed in to remove the armrest completely (e.g. for getting in
and out) and never to extend the width adjustment!
Carrying out adjustments
• Loosen clamping lever (1)
• Adjust armrest to required
position.
• Retighten the clamping lever.
• Repeat this procedure for the
second armrest.
53