9.6.2
Adjusting the backrest (firm seat)
9.6.2.1
Electrical
Please consult the user manual for your remote for information about electrical adjustment.
9.6.2.2
Manual
The angle of the manually adjustable backrest is continuously adjustable between +2° and +22°.
Pre-requisites:
• 1x Open-end spanner 13 mm
• 1x Phillips screwdriver
The angle of the manually adjustable backrest is adjusted
on both sides by means of a knurled adjustment screw (1)
and a limiting screw (2), which is fitted with a counter nut
(3).
• Loosen the knurled screws (1) on both sides.
• Loosen the counter nut (3) of the limiting screw (2),
using the open-end spanner 13 mm.
• Adjust the limiting screws (2) evenly on both sides to the
desired backrest angle, using the Phillips screwdriver.
• Tighten the counter nut (3).
• Re-tighten the knurled screws.
71