13.2.1 How the wheelchair is anchored in a vehicle for use as a vehicle seat
The power wheelchair is fitted with four anchoring points, which are labelled
with the symbol shown on the right. Snap hooks or belt loops can be used for
fixation.
• Secure the wheelchair at the front (1) and at the rear (2) with the anchoring system belts. The
kerb climber does not have to be removed.
• Secure the wheelchair by tensioning the belts in accordance with the anchoring system
manufacturer's instruction manual.
Front (with kerb climber)
156
Front (without kerb climber)
Rear (only left-hand side
visible in picture)