Adjusting The Height Of The Remote; Swing-Away Remote Holders); Swivelling The Remote To The Side; Adjusting The Height Of The Armrests - Invacare Fox User Manual

Invacare® Fox™
5.2.2 Adjusting the height of the remote (only for
swing–away remote holders)
Tools:
•
6 mm Allen key
Loosen the Allen screw A.
1.
2. Adjust the remote to the desired height.
3. Re-tighten the Allen screw.

5.2.3 Swivelling the remote to the side

If your mobility device is fitted with a swing-away remote holder,
then the remote can be moved away to the side, for example, to
drive up close to a table.
24

5.3 Adjusting the height of the armrests

Loosen wing screw A.
1.
2. Adjust armrest to desired height.
3. Re-tighten wing screw.

5.4 Adjusting the width of the armrests

Tools:
•
8 mm Allen key
1577074-B