Invacare Spectra XTR User Manual page 151

• Apply the wheel rim halves to the wheel again.
• Inflate the tyre a little.
• Place the cylinder head screws in the wheel rim and tighten them to 10 Nm. Ensure that the
inner tube is not clamped between the wheel rim halves.
• Ensure that the tyre is contacting the wheel rim directly.
• Inflate the tyre to the recommended pressure.
• Ensure that the tyre is still closely contracting the wheel rim.
• Screw the valve cap on again.
• Fit the wheel again.
• Place the torx screws in position with a screw blocker system and tighten them to 30 Nm.
151