10.2.2 Standard / Junior / Mini Legrests (firm seat)
10.2.2.1 Adjusting the length of the legrest
PLEASE NOTE: Danger of injury due to incorrect adjustment of the footrests and legrests.
• Before and during every journey it is imperative to ensure that the legrests contact neither the
castor wheels nor the ground!
Pre-requisites:
• 1x Open-ended spanner 13 mm
• Remove the plastic cover cap from the adjustment screw
(1).
• Loosen the screw, using the open-ended spanner 13
mm.
• Set the legrest to the desired length. Take care not to
rotate the lower part of the legrest in its support tube.
• Re-tighten the screws.
• Re-position the plastic cover cap.
128