Power Management Feature - Hansol 700Fs User Manual

Click 'Monitor'.
Click 'Advanced..'.
Click 'Display a list of all...'.
Click 'Next>'.
Select the driver and click 'OK'.
Click 'Next>'.
3. Select Exit if the monitor model is changed, and then reboot Windows.
8
Click 'Next>'.
Click 'Have Disk..'.
Click 'Next>'.
Click 'Finish'.

Power Management Feature

When not in use for a long period of time, the monitor
automatically reduces its power consumption, meeting power saving
standards of EPA and NUTEK.
The monitor is equipped with a power saving circuit that
conforms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESA).
The power management feature requires that the video card of the
computer should support DPMS function.
Status Color of LED Power Consumption
Normal Green
Power Cut Off Amber/Blinking
( 2 second interval )
No image is displayed with LED blinking.
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plugs on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the
maximum frequency of the monitor. Readjust resolution and frequency in
accordance with the monitor capacity. (Refer to Standard Signal Table)
Normal Power
5 W or Below
9 9