Hansol 700Fs User Manual page 10

16
OSD Overlay
MENU
VOL
1. Use to select the OSD Overlay.
2. Use to adjust OSD Overlay.
3. Press the Menu button to exit.
Sharpness
VOL MENU
1. Use to select the Sharpness.
2. Use to adjust Sharpness.
3. Press the Menu button to exit.
Language
MENU VOL
1. Press the Menu button.
2. Use to select the Language.
3. Use to select language in order.
Auto-Config
MENU
VOL
1. Press the Menu button.
2. Use to select the Auto-Config.
3. Use to readjust the display condition.
In most cass, Auto-Config adjusts display
appropriately. Use PH or adjust CLK.
in accordance with graphic card to fine tune
the display.
Version
MENU VOL
1. Press the Menu button.
2. Use to select the Version.
3. Check the version.
Information
MENU
VOL
1. Press the Menu button.
2. Use to select the Information.
3. You can know a display information
(Horizantal, Vertical Frequency)
17