Power Management Feature; Standard Signal Table - Hansol D19BL User Manual

Color Monitor
Power
The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager
Management Signalling (DPMS) mode of Video Electronics Standard Association(VESA).
The power management feature requires that the video card of the computer should support DPMS function.
Feature
Standard Signal
Table
Status
Normal mode
Stand-by mode
Power-Off mode
No image is displayed with Green blinking
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plug on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the maximum
frequency of the monitor. Readjust resolution and frequency in accordance with the monitor
capacity.(Refer to Standard Signal Table)
Horizontal
Resolution
Frequency(kHz)
VGA (720 x 400)
VGA (640 x 480)
VGA (640 x 480)
VGA (640 x 480)
SVGA (800 x 600)
SVGA (800 x 600)
XGA (1024 x 768)
XGA (1024 x 768)
SXGA (1280 x 1024)
SXGA (1280 x 1024)
UXGA (1600 x 1200)
LED Sign
Green ON
Green Blinking(0.5Sec)
Green Blinking(1Sec)
Vertical
Frequency(Hz)
31.469 70.087
31.469 59.940
37.500 75.000
43.269 85.008
46.875 75.000
53.674 85.061
60.023 75.029
68.677 84.997
79.976 75.025
91.146 85.024
93.750 75.000
Power Consumption
110 Watts
Less than 15 W
Less than 5 W
Clock Frequency Sync Polarity
(MHz)
28.322
25.175
31.500
36.000
49.500
56.250
78.750
94.500
135.000
157.500
202.500
(H/V)
/ +
－
/
－ －
/
－ －
/
－ －
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
8