Ptp 54500 Radio System Specifications; Table 31 - Ptp 54500 Rf Specifications - Motorola PTP 500 Series User Manual

16.2.4 PTP 54500 Radio System Specifications

Table 31 contains radio system specifications for the PTP 54500.
Radio Technology
RF Band
Channel Selection
Channel size
Transmit Power
Modulation
Receiver Noise Figure
Antenna Type
Antenna Gain
Antenna Beamwidth
Receiver Sensitivity
Duplex Scheme
Range
Security and Encryption
Weather Sensitivity
Error Correction

Table 31 - PTP 54500 RF Specifications

Specification
5.470-5.725 GHz
By intelligent Dynamic Frequency Selection (i-DFS) or
manual intervention.
Automatic detection on start-up and continual adaptation to
avoid interference.
5, 10 and 15 MHz
Varies with modulation mode and settings from -18 dBm to
27 dBm.
Dynamic; adapting between BPSK single and 64 QAM.
Typically 6 dB
Integrated: Flat plate antenna. Connectorized: Approved to
operate with a selection of separately-purchased single and
dual polar antennas through 2xN-type connectors (check
local regulations prior to purchase).
23 dBi typical
8 Degrees
Adaptive, varying between -94 dBm and -69 dBm.
Symmetric fixed, asymmetric fixed or adaptive TDD; same
frequency Tx/Rx.
155 miles (250 km)
Proprietary scrambling mechanism. Optional FIPS-197
compliant 128- and 256-bit AES Encryption.
Sensitivity at higher modes may be reduced during high
winds through trees due to Adaptive Modulation Threshold
changes.
FEC
223
16 PTP 500 Reference Information