Smtp (Simple Mail Transport Protocol) - Motorola PTP 500 Series User Manual

SNMP Enabled Traps
The SNMP Enabled Traps attribute controls which SNMP Traps the unit will send.
SNMP Community String
The SNMP community string acts like a password between the networks SNMP management
entity and the distributed SNMP clients (PTP 500 Series bridge). Only if the community string
is configured correctly on all SNMP entities can the flow of management information take
place. By convention the default value is set to 'public'. When the community string is
changed the system requires a mandatory reboot before the new string or phrase is adopted.
SNMP Port Number
Is the port the SNMP management agent is listening to for commands from an SNMP
manager. The default value for this port number is 161.
SNMP Trap IP Address
Is the address of either the network SNMP manager or Trap receiver. When asynchronous
events (traps in SNMP terminology) are generated, the client unicasts these to this IP
Address. When the address is changed the system requires a mandatory reboot before the
setting is adopted
SNMP Trap Version
The SNMP protocol version to use for SNMP traps. Note that a system reboot is required to
activate changes to this attribute.
SNMP Trap Port Number
The SNMP Trap Port Number is the port number of either the networked SNMP manager or
Trap receiver. By convention the default value for the port number is 162. When the port
number is changed the system requires a mandatory reboot before the setting is adopted.
WiMAX Control
Enables and Disables the WiMAX (802.16) MIB. This control is only displayed when 'Fixed
Frequency' is selected during installation.

7.10.7 SMTP (Simple Mail Transport Protocol)

The SMTP client is an alternative method for the PTP 500 Series bridge to alert a system
administrator when there are or have been system errors:
SMTP Email Alert
This attribute controls the activation of the SMTP client.
SMTP Enabled Messages
The SMTP Enabled Messages attribute controls which email alerts the unit will send.
SMTP IP Address
The IP address of the networked SMTP server.
SMTP Port Number
The SMTP Port Number is the port number used by the networked SMTP server.
convention the default value for the port number is 25.
SMTP Source Email Address
The email address used by the PTP 500 Series to log into the SMTP server. This must be a
valid email address that will be accepted by your SMTP Server.
142
7 Web Page Reference
By