Manual Configuration; Figure 55 - License Key Data Entry - Motorola PTP 500 Series User Manual

7.7.2 Manual Configuration

If the installer / system administrator wishes, they may modify the default installation
configuration. If only the IP addresses (network configuration) are incorrect it is recommended
that the values are changed via the configuration menu (Section 7.5.2 "LAN Configuration").
NOTE
If any other parameters (for example Region Code) require modification, then it is
recommended that the system administrator use the Installation Wizard.
The PTP 500 Series bridge operational software requires a license key (Figure 55) to enable
the wireless bridging capability and programs region code specific parameters in to the unit.
A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Deployment Guide. If
subsequently the license key has been mislaid, replacement keys can be applied for online or
via your distributor.

Figure 55 - License Key Data Entry

106
7 Web Page Reference