Replacing The Steering Head Bearings On The Front Or Rear Castor Wheels; Front Castor Wheels - Invacare Tornado Service Manual

Service Manual
6.9 Replacing the steering head bearings on the front or rear castor
wheels
CAUTION! Incorrect reassembly can damage the bearings or cause the steering wheels to
fall out!
• The single-row angular ball bearing races are not the same on both sides! For this reason
there is only one correct way to fit them! It is imperative that you observe the reassembly
information!
Requirements:
•
Socket wrench 19 mm
•
Torque wrench
6.9.1

Front Castor Wheels

•
Release the plastic clips (1) that hold the
shroud.
•
Pull the shroud outwards and forward to
remove.
As at: 19.03.2004 Page 41
Tornado