Service Manual
CAUTION! Electronics can be damaged!
• Disconnect all electronic components from the batteries before commencing work on the
batteries. A short-circuit during the following work could otherwise damage the electronics.
•
Disconnect all plugs from the electronic
components.
Please note
Please make a note of the cable layout. In case the cable layout is not flexible enough, the cable
binders can be opened.
•
Remove all pole caps from the poles.
•
Unscrew the screws (1) on the minus poles
using an 11mm open-jawed wrench.
•
Unscrew the screws (2) on the plus poles
using an 11mm open-jawed wrench.
CAUTION! Danger of crushing!
• The batteries are very heavy. Please ensure that they do not hit the ground when being
removed from the chassis.
•
Pull the battieres out to the front using the
carrying belt.
CAUTION! Fire hazard! Cables can be pinched and chafed.
• Please ensure correct cable layout! They may not protrude into the lifter area. Use cable
binders if necessary.
As at: 19.03.2004
Page 31
Tornado