Invacare Tornado Service Manual page 33

Tornado
•
Installation is carried out in the reverse
order.
Please note
The battery inserters can be inserted between the battery and the carrying belt. They are thus
easier to install.
Please note
The battery poles on the rear battery must point backward and those on the front battery to the
front. The batteries cannot be connected in any other fitting direction.
•
Assemble in accordance with this installation
sequence:
•
Push the batteries (3) together with the
carrying belt (5) and battery inserter (4) into
the chassis.
•
Push the regulating motor (2) together with
the nest into the chassis and allow to lock
into place in the bottom plate. Secure using
lateral Allen screws.
•
Apply the front panelling (1) and secure
using lateral Allen screws.
•
Screw the battery cable onto the plus and
minus pole. Slide the pole caps over the
poles.
•
Plug all cables into the electronic
components until you hear a slight click.
CAUTION! Danger of crushing!
• Please ensure that the regulating motor slides into the upper guiding device.
•
Move the regulating motor to the uppermost
position and ensure that it slides into the
upper guiding device (1).
Page 32
Service Manual
As at:19.03.2004