Invacare Tornado Service Manual page 47

Tornado
•
Release the forward plastic clip (1) that
holds the inner shroud.
•
Remove the inner shroud.
•
Use the 6 mm Allen key and the 13 mm
open-ended wrench to remove the lower bolt
(1) that attaches the Walking Beam and the
steering head tube of the front castor wheel.
•
Use the 13 mm open-ended wrench to
remove the bolt (1) that holds the lower
plastic guide of the anti-dive spring.
•
The two halves of the Walking Beam can
now be moved independently from each
other. Lift the upper part, which is still
attached to the steering head tube of castor
wheel, to release the pressure on the anti-
dive spring (1).
•
Replace the anti-dive spring and/or the
plastic guide(s) if necessary.
Page 46
Service Manual
As at:19.03.2004