Invacare Tornado Service Manual page 27

Tornado
•
Secure the drive unit against falling out by
placing a wooden block or styrofoam block
underneath.
•
Insert the hexagon socket (5mm) through
the bore and unscrew the rear bolts (1) on
the drive suspension.
•
Remove the drive unit from the suspension
in a downward direction.
•
Unscrew the six screws (1) on the bedding
plate.
CAUTION! Fire hazard! Cables can be pinched and chafed.
• Please ensure correct cable layout! The motor cable must be secured on the panelling by
means of a plastic ring and may not protrude into the lifter area.
•
The drive unit is installed in reverse order.
Page 26
Service Manual
As at:19.03.2004